Only in this way can TPE live dolls be well maintained

1. Doll material is a new type of polymer material refined from TPE, also known internationally as Cyberskin. This material is non-toxic and odorless, with a hardness below Shore A0 degrees and a tensile strength of over 6 times. Smooth and delicate like human skin, soft and elastic. The materials comply with relevant national safety standards and are non-toxic to human health and the environment.

 

 

 

2. The doll has various metal joints inside its body, which can be manipulated to create various postures and shapes within a certain range. During production, there are screw fixation holes on the soles of the feet and calves to fix the internal skeletal joints. After processing, there are slight modification marks.

 

 

 

3. Dolls should not be scratched on the surface of models with sharp tools, and should not be forcefully kneaded to avoid damaging the surface skin, affecting the use time and appearance.

 

 

 

4. Avoid wearing clothing that is prone to fading or has poor coloring techniques to avoid contaminating the model. Dolls dyed due to clothing wear will be difficult to clean, so please be careful.

 

 

 

5. Cannot be placed together with substances containing ink, such as newspapers and magazines. Avoid placing dark colored clothing or leather fabrics containing oil soluble pigments together to avoid contaminating the doll.

 

 

 

6. Do not leave the doll in direct sunlight for a long time to avoid material aging and affecting its usage time.

 

 

 

7. The doll's posture is straight when it leaves the factory. Do not place the doll in a difficult bending position for a long time to avoid deformation and damage to a certain area due to prolonged pulling.

 

 

 

8. If there are indentations or strangulation marks on the surface of the doll due to prolonged squeezing, a clean and scratch free white cloth can be moistened with water, and then hot air can be blown onto the surface of the cloth. After waiting for a period of time, the indentations will disappear.

 

 

 

9. After being displayed for a long time, the surface area of the doll may have dust and dirt, which can be cleaned with regular detergents such as laundry detergent. If you encounter stubborn stains, you can use laundry detergent and dry powder dipped in a small amount of water to directly scrub, which is easier to remove. But it should be avoided to use fingernails vigorously to scratch the surface of the doll. After washing, wait for the surface moisture to dry, then apply the texture powder (or ordinary prickly heat powder can be used as a substitute) evenly on the surface. After washing, the surface is smooth as before, with a delicate touch. Suggestion: Regularly clean and maintain according to the situation.

 

 

 

10. If there is a small area of damage on the surface of the doll, the adhesive provided can be used for bonding. First, clean the damaged surface, then evenly apply a layer of adhesive on the two cut surfaces, then bond the two cut surfaces together, and finally apply a thin layer of adhesive on the surface. Wait for about half an hour for the adhesive to dry and solidify. If there are any other technical issues, you can directly contact the seller or manufacturer, and the manufacturer will generally provide processing techniques according to the situation.

--Reprinted from the public account: Entity doll combat experience